Modeling Postfire Response and Recovery using the Hydrologic Engineering Center Hydrologic Modeling System (HEC‐HMS)1

Abstract: This paper investigates application of the Army Corps of Engineers’ Hydrologic Engineering Center Hydrologic Modeling System (HEC‐HMS) to a burned watershed in San Bernardino County, California. We evaluate the HEC‐HMS’ ability to simulate discharge in prefire and postfire conditions in a semi arid watershed and the necessary parameterizations for modeling hydrologic response during the immediate, and subsequent recovery, period after a wildfire. The model is applied to City Creek watershed, which was 90% burned during the Old Fire of October 2003. An optimal spatial resolution for the HEC‐HMS model was chosen based on an initial sensitivity analysis of subbasin configurations and related model performance. Five prefire storms were calibrated for the selected model resolution, defining a set of parameters that reasonably simulate prefire conditions. Six postfire storms, two from each of the following rainy (winter) seasons were then selected to simulate postfire response and evaluate relative changes in parameter values and model behavior. There were clear trends in the postfire parameters [initial abstractions (I_a), curve number (CN), and lag time] that reveal significant (and expected) changes in watershed behavior. CN returns to prefire (baseline) values by the end of Year 2, while I_a approaches baseline by the end of the third rainy season. However, lag time remains significantly lower than prefire values throughout the three‐year study period. Our results indicate that recovery of soil conditions and related runoff response is not entirely evidenced by the end of the study period (three rainy seasons postfire). Understanding the evolution of the land surface and related hydrologic properties during the highly dynamic postfire period, and accounting for these changes in model parameterizations, will allow for more accurate and reliable discharge simulations in both the immediate, and subsequent, rainy seasons following fire.     

Convergence of Culture, Ecology, and Ethics: Management of Feral Swamp Buffalo in Northern Australia

This paper examines the identity of Asian swamp buffalo (Bubalus bubalis) from different value orientations. Buffalo were introduced into Northern (Top End) Australia in the early nineteenth century. A team of transdisciplinary researchers, including an ethicist, has been engaged in field research on feral buffalo in Arnhem Land over the past three years. Using historical documents, literature review, field observations, interviews with key informants, and interaction with the Indigenous land owners, an understanding of the diverse views on the scientific, cultural, and economic significance of buffalo was obtained. While the diverse stakeholders in buffalo exploitation and management have historically delivered divergent value orientations on the nature of the human–buffalo relationship, we argue that over time there is the possibility of values and ethical convergence. Such convergence is possible via transdisciplinary and transcultural agreement on the value stances that constitute the construction of the being or identity of buffalo in the face of the overwhelming need to manage population density and gross numbers.     

Review of Russian-language studies on radionuclide behaviour in agricultural animals: part 4. Transfer to poultry

Data on radionuclide transfer to domestic chickens and ducks obtained from research performed in the former Soviet Union were reviewed to provide transfer coefficient values (Ff) to poultry and edible egg contents. The majority of the data are from experiments with ⁹⁰Sr and ¹³⁷Cs, reflecting the importance of these radionuclides after global fallout and major radiation accidents. Data for ³H, ⁵⁴Mn, ⁵⁹Fe, ⁶⁰Co, ²²Na ⁶⁵Zn, ¹³¹I and U are also given. The values derived have been compared with those in the current IAEA Handbook of parameter values for the prediction of radionuclide transfer in temperate environments (TRS 364) and the recent revision which incorporates the values from this paper. The Russian-language data give improved estimates for many radionuclides and the revised handbook is now based on the better quality data given for chronic administration.     

New best estimates for radionuclide solid–liquid distribution coefficients in soils. Part 3: miscellany of radionuclides (Cd,Co, Ni,Zn, I,Se, Sb,Pu, Am,and others)

New best estimates for the solid–liquid distribution coefficient (K_d) for a set of radionuclides are proposed, based on a selective data search and subsequent calculation of geometric means. The K_d best estimates are calculated for soils grouped according to the texture and organic matter content. For a limited number of radionuclides this is extended to consider soil cofactors affecting soil–radionuclide interaction, such as pH, organic matter content, and radionuclide chemical speciation. Correlations between main soil properties and radionuclide K_d are examined to complete the information derived from the best estimates with a rough prediction of K_d based on soil parameters. Although there are still gaps for many radionuclides, new data from recent studies improve the calculation of K_d best estimates for a number of radionuclides, such as selenium, antimony, and iodine.     

Modeling linkages between sediment resuspension and water quality in a shallow,eutrophic, wind-exposed lake

The interactions between bed sediments and the water column in shallow, eutrophic lakes have tremendous implications for the fate and transport of nutrients in those water bodies. This has resulted in the development of water quality models for lakes incorporating the processes of sediment resuspension. Reliable resuspension models are thus needed to accurately represent this phenomenon. In this paper, three different sediment-resuspension models are combined with a hydrodynamic and water quality model, dynamic lake model-water quality (DLM-WQ), and the resulting models are used to simulate nutrient distributions in the highly eutrophic Salton Sea, California, USA. One of the resuspension formulas is based upon sediment characteristics as well as the bed shear stress exerted by wind-induced waves and currents, while the other two are standard, power-law-type formulas for cohesive sediments with two different exponents. The outputs for water quality variables, such as temperature, chlorophyll a, dissolved oxygen and nutrients, obtained from the three resulting models and from an earlier DLM-WQ run with a simple empirical sediment-resuspension model are compared with measured data. The level of agreement between the simulations and the measured data is assessed by using both statistical and graphical model evaluation methods, including measures of residual errors, sample autocorrelations, t-tests, and box plots. Based on these assessments, DLM-WQ with an extended version of the García and Parker [García, M.H., Parker, G., 1993. Experiments on the entrainment of sediment into suspension by a dense bottom current. J. Geophys. Res.-Oceans 98, 4793–4807] relationship gave the best results for water quality in the Salton Sea, confirming that the use of formulas with more information on the sediment characteristics yields more accurate results. To the best of our knowledge, this is the first effort to combine water quality models for lakes and reservoirs with a sediment-resuspension model which was originally intended for open-channel flows. The simulations confirm that sediment resuspension is the most dominant process in the Salton Sea's nutrient cycling. The effect of proposed physical changes to the Salton Sea on water quality characteristics is also addressed.     

Impact of European legislation on marketed pesticides — A view from the standpoint of health impact assessment studies

The very significant impact of European legislation (Directive 91/414/EEC) on the authorization of plant protection products is reviewed herein, which has resulted in withdrawal of 704 active substances (AS) out of 889 assessed so far. The list of currently approved 276 AS includes 194 AS “existing” in the market before 1993 and 82 “new” AS introduced during the last 15 years. Results of toxicity characterization of the approved AS are also summarized, utilizing several well-known databases. Although significant data gaps exist for a rather large part of the approved AS, it is found that 84 AS are positive for at least one health effect (after chronic and/or acute exposure) including carcinogenicity, reproductive and neuro-developmental disorders, as well as endocrine disruption. The toxicity characterization results of this study are compared to those of recent assessments by other organizations (KemI, the Swedish Chemicals Agency, and the Pesticide Safety Directorate of the UK), where interpretation and use is made of AS “cut-off” criteria foreseen in new EU legislation. These studies report a comparatively smaller AS number with positive toxicity characterization. The possibility of some additional AS withdrawal in the near future, combined with the rather small rate of new AS introduction (approx. 5 per year) suggest that the list of approved AS over the next 10–15 years may not change very drastically. Consideration of the above trends is necessary and instructive in evaluating results of existing health impact assessment (HIA) studies, as well as in planning new ones. Due to the very drastic change in the number and type of marketed AS, that took place within the past 8–9 years, it is suggested that new HIA studies (based on epidemiological data after year 2000) should focus on a rather short time frame and, therefore, on appropriate cohort groups, e.g. young children. For the same reason, results of epidemiological studies of the past (involving banned AS) should be carefully interpreted and used with caution.     

Why ozonolysis may not increase the hydrophilicity of particles

It is commonly assumed that atmospheric oxidation of hydrocarbon particles or hydrocarbon coatings on particles leads to polar products and increased water uptake, altering atmospheric visibility and increasing the likelihood they will act as cloud condensation nuclei (CCN). We show here through laboratory experiments that increased water uptake depends on the 3-dimensional structure of the particles. Laboratory studies of particles formed during ozonolysis of surface-bound alkenes, present as terminally unsaturated self-assembled monolayers (C8= SAM) on a silica substrate, were carried out at room temperature and 1 atm pressure. SAMs were exposed to ～10¹³ O₃ molecules cm^?3 for 40 min and resultant particles were analyzed using single particle Fourier transform infrared micro-spectroscopy (micro-FTIR) and secondary ion mass spectroscopy (SIMS). Spectroscopy results show that –COOH and other polar groups are formed but are buried inside a hydrophobic shell, consistent with earlier observations (McIntire et al., 2005, Moussa et al., 2009) that water uptake does not increase after reaction of the terminal alkene with O₃. These insights into the 3-D structure of particles formed on oxidation have important implications for the ability of secondary organic aerosols to act as CCN. In addition, the nature of the surface of the particles is expected to determine their uptake into biological systems such as the surface of the lungs.     

Development of an analytical method for analysis of flubendiamide,des-iodo flubendiamide and study of their residue persistence in tomato and soil

Flubendiamide is a new insecticide that has been found to give excellent control of lepidopterous pests of tomato. This study has been undertaken to develop an improved method for analysis of flubendiamide and its metabolite des-iodo flubendiamide and determine residue retention in tomato and soil. The analytical method developed involved extraction of flubendiamide and its metabolite des-iodo flubendiamide with acetonitrile, liquid-liquid partitioning into hexane-ethyl acetate mixture (6:4, v v^?1) and cleanup with activated neutral alumina. Finally the residues were dissolved in gradient high pressure liquid chromatography (HPLC) grade acetonitrile for analysis by HPLC. The mobile phase, acetonitrile-water at 60:40 (v v^?1) proportion and the wavelength of 235 nm gave maximum peak resolution. Using the above method and HPLC parameters described, nearly 100 % recovery of both insecticides were obtained. There was no matrix interference and the limit of quantification (LOQ) of the method was 0.01 mg kg^?1. Initial residue deposits of flubendiamide on field-treated tomato from treatments @ 48 and 96 g active ingredient hectare^?1 were 0.83 and 1.68 mg kg^?1,respectively. The residues of flubendiamide dissipated at the half-life of 3.9 and 4.4 days from treatments @ 48 and 96 g a.i. ha^?1, respectively and persisted for 15 days from both the treatments. Des-iodo flubendiamide was not detected in tomato fruits at any time during the study period. Residues of flubendiamide and des-iodo flubendiamide in soil from treatment @ 48 and 96 g a.i. ha^?1 were below detectable level (BDL, < 0.01 mg kg^?1) after 20 days. Flubendiamide completely dissipated from tomato within 20 days when the 480 SC formulation was applied at doses recommended for protection against lepidopterous pests.     

Diffusion mechanism of lindane into wood charcoal

Abstract

The wood charcoal treated by 1N HNO₃ (WCT) was used to remove toxic chlorinated pesticide lindane (y‐HCH) residue from water by the sorption process. Using a simple first order reversible kinetics constants and half time equations, the film and pore diffusion coefficients were determined. Film diffusion was found to be rate limiting step in sorbing lindane by WCT. This was further authenticated by kinetics studies at different initial sorbate concentrations, different sorbent sizes, and different agitation speeds besides interruption test. A pore diffusion model was used to fit the data of kinetics in continuously mixed batch reactors (CMBR), and the tortuosity, external resistance, and surface diffusion effects on lindane sorption by WCT were noticed. The tortuosity values of 15 to 28 were obtained for WCT‐lindane system.